Brick Pointing Strategies For brand new and Old Brickwork

Brick Pointing Strategies For brand new and Old Brickwork

Blog Article

Brick pointing is the strategy of applying a small degree of mortar in to the deal with joint between bricks. These bricks can both be freshly laid kinds or old brickwork. In new brickwork, pointing is completed to use more durable mortar to boost climate defense over the exposed faces. In previous brickwork, the strategy is utilized to repair the mortar joints which have been eroded by publicity to numerous elements.

For laying new and old brickwork, there are various procedures that need to be followed to be able to do the process thoroughly.

On new brickwork, brick pointing should be completed at practical intervals. Breaks at easy details should be held to allow adequate time for cleansing out the area mortar of the segment. The mortar inside the joints must be scraped to your depth of about twelve mm from the brick surface. A wall can only be pointed when it has been accomplished.

With regard to aged brickwork, the important brick pointing techniques consist of chipping out the previous mortar and pointing it into a suitable depth. The conventional depth is twelve mm from the brick surface. In getting rid of the previous mortar, angle grinders are sometimes applied. Acquire Take note that the procedure will cause lots Brick pointing contractors of dust, which means you greater use deal with mask and goggles as you are doing The work.

As soon as the wall is able to be pointed, the brick pointing procedures for the mortar follows. Make sure that the joints are wetted initial prior to getting full of the pointing mortar.

Make a fairly stiff mixture of the mortar and put a small sum on the hawk. In cutting off slithers of mortar, a small pointing trowel can be utilized. Hold the mortar up on the edge in the trowel and press it in to the joints to become stuffed. Then, cautiously draw the blade backwards. Repeat the measures until finally the mortar is flushed With all the confront in the bricks.

Do the brick pointing strategies by filling the vertical cross-joints very first, followed by the horizontal bed-joints. When greater than a square meter continues to be filled, finish it using the demanded design and style.

Report this page